Back to the
main site

 
 FAQFAQ    SearchSearch  RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 
Having trouble registering?
Especially Yahoo Users --> Read this...

New --> Click to View All Messages within 24 hours
The sole intent of this board is to provide an option to communicate quickly and effectively with the racing community as well as any person with interest. Any post considered to be mean-spirited in nature will be deleted. Questions and comments are welcome and should be forwarded to info@spartanspeedway.com.

Rules and Payout for Spartan Stock A Division - August 12

 
Post new topic   Reply to topic     Forum Index -> Spartan Speedway
View previous topic :: View next topic  
Author Message
Bill Lackey



Joined: 01 Aug 2006
Posts: 185

PostPosted: Fri Aug 03, 2012 10:48 am    Post subject: Rules and Payout for Spartan Stock A Division - August 12 Reply with quote

BODY:
ABC Bodies
a) All cars will have an un-altered template tail and nose piece, mounted with the same dimensions and height as an ABC body has. No down force noses, no widened out tail panels (check Five Star dimensions).
b) The roof will have an un-altered full size template roof, complete with un-altered template C pillars. The roof will be centered on your car from side to side. No off setting of the roof on the body. Full front windshield.
c) No off setting bodies. Body must be square on the chassis. You are allowed to fabricate the remaining body panels but must keep them stock appearing and with in the dimensional maximum and minimum guidelines of the ABC bodies. Body panels must attach to the nose and tail pieces in a stock fashion.
d) Spoiler max is 6 1/2" X 60". Clear material.
e) Weight may be added for minor infractions, at officials discretion (on a temporary basis).
Full Perimeter Cars:
a) Must be complete with all panels intact and remain stock appearing.
b) Spoiler maximum is 6 1/2" X 60". Clear material.
c) Maximum width is 82"
d) No sharp edges.
e) Bumpers must be rounded.
f) Side glass must be removed. Windshield may be 1/8" lexon.
g) Tow hooks are required.
CHASSIS:
a) Maximum width is 82". Measured outside to outside of tires 1" to 2" from ground.
b) Minimum wheel base is 102".
c) Fully contained shocks only. No external components, lines, canisters, etc. Coil over ok.
ENGINES
a) Must be cast iron with 23 degree cast iron heads, wet sump, no external pumps of any kind.
b) No aluminum heads.
c) Maximum engine set back is 2 1/2" from center of upper ball joint to center of the first spark plug hole.
d) No magneto ignitions.
e) One carburetor.
Addendum #1 March 2012
The following 23 degree aluminum heads allowed:
GM # 12464298
Ford# M-6049-2304A
WEIGHT:
a) Pre-race with driver. Race ready.
b) Minimum base weight is 2850 lbs.
c) Stock front sub with tubed style chassis is 2950 lbs.
d) Full tubed front strut style chassis is 3000 lbs.
e) All weight must be painted white and properly mounted. May not be below bottom of frame rail.

WHEELS AND TIRES:
a) Steel wheels, 8" maximum width. Any off set.
b) 1" lug nuts required.
c) Hoosier 970, 880, 800, 790 or DOT radials (60-75 series).
EXHAUST:
a) Mufflers mandatory.
b) Must exit behind driver.
c) Maximum decibel reading level of 100db

Check website at www.spartanspeedway.com. for rules, gate times and other information.

ALL SPARTAN SAFETY RULES APPLY.

PURSE:

A DIVISION FOR SUNDAY, AUGUST 12

1. 1,000
2. 500
3. 325
4. 300
5. 275
6. 225
7. 210
8. 190
9. 170
10. 150
11. and down 140.
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic     Forum Index -> Spartan Speedway All times are GMT - 5 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group